DISCO DAC552 Kurulum Kılavuzu - Sayfa 8
Testere DISCO DAC552 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DISCO DAC552 20 sayfaları. Automatic dicing/cutting saws
Sayfayı YazdırExternal view
The diagram and the table below show the external view, names and functions
of main constituents.
Spindle coolant water
flow rate sensor
[Optional accessory]
Microscope
Waterproof cover
Slide cover
Operation panel
Waterproof cover
Slide cover
Vacuum gauge
Flowmeter
Floppy disk drive
Pilot lamp
Monitor
POWER lamp
POWER switch
Maintenance switch
Direct light intensity
adjustment dial
Oblique light intensity
adjustment dial
EMO switch
Microscope
Wheel coolant water flowmeter
Operation panel
Name
Consists of operation control keys.
Prevents water from splashing around during spindle
rotation and functions as a safety device.
Prevents water from splashing around during spindle
rotation and functions as a safety device.
Indicates the chuck table vacuum pressure to attract the
workpiece to the chuck table.
Indicates the flow rate of the wheel coolant water.
Functions as an external storage device.
[Optional accessory]
Indicates the machine operating status with the blue, green
and yellow lamps. If an error occurs, the red lamp flashes on
and off. [Optional accessory]
Displays operating information and microscope images.
Lights while the power is ON.
Used to turn ON and OFF the machine by inserting and
rotating the key.
Used by the maintenance personnel.
Adjusts the microscope image light intensity for direct
lighting.
Adjusts the microscope image light intensity for oblique
lighting. [Optional accessory]
Functions as the emergency stop switch. When pressed,
shuts off the electrical power supply.
Used to view workpieces for alignment or other purposes.
Intro-4
Pilot lamp [Optional accessory]
Vacuum gauge
Monitor
Oblique light intensity
adjustment dial
[Optional accessory]
Function
Floppy disk drive
[Optional accessory]
Power switch
Maintenance
switch
EMO switch
POWER lamp
Direct light intensity
adjustment dial