DISCO DAD321 Veri Bakım Kılavuzu - Sayfa 8
Testere DISCO DAD321 için çevrimiçi göz atın veya pdf Veri Bakım Kılavuzu indirin. DISCO DAD321 20 sayfaları. Automatic dicing/cutting saws
Ayrıca DISCO DAD321 için: Bakım Kılavuzu (20 sayfalar)
Sayfayı Yazdır
- 1. Read Carefully before Using this Manual
- 2. Introduction
- 2. Table of Contents
- 3. Contents
- 4. C. General Description of Data Screen
- 5. Important Safety Information
- 5. General Safety Precautions
- 5. Safety Precautions to be Observed During Operation
- 5. Inherently Hazardous Areas and Ways to Avoid Hazards
- 5. EMO Switch
- 5. Operations
External View [321/351/361]
The diagram and the table below show the external view, names and functions
of main constituents.
Operation Panel
Splash Cover
Vacuum Gauge
Flowmeter
Disk Drive
Pilot Lamp
Monitor
POWER Lamp
Key Switch
Maintenance Switch Used by the maintenance personnel.
Light Intensity
Adjustment Dial
EMO Switch
Microscope
Chuck Table
Pilot lamp
Disk drive
Flowmeter
Vacuum gauge
Splash cover
Operation panel
Name
Consists of operation control keys.
Prevents water from splashing around during spindle
rotation and functions as a safety device.
Indicates the chuck table vacuum pressure to attract
the workpiece to the chuck table.
Indicates the flow rate of the wheel coolant water.
Functions as an external storage device.
Indicates the machine operating status with the green
and yellow lamps. If an error occurs, the red lamp
flashes on and off.
Displays operating information and microscope
images.
Lights while the power is ON.
Used to turn ON and OFF the machine by inserting
and rotating the key.
Adjusts the microscope image light intensity.
Functions as the emergency stop switch. When
pressed, shuts off the electrical power supply.
Used to view workpieces for alignment and other
purposes.
Used to mount workpieces on it.
Intro-4
Monitor
POWER lamp
Key switch
Maintenance switch
Light intensity
adjustment dial
EMO switch
Microscope
Chuck table
Function
[Option accessory]