Discount Car Stereo A2DIY-CHRY02 Hızlı Başlangıç Kurulum Kılavuzu - Sayfa 2

Araba Stereo Sistemi Discount Car Stereo A2DIY-CHRY02 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kurulum Kılavuzu indirin. Discount Car Stereo A2DIY-CHRY02 8 sayfaları. For chrysler cd changer controlling radios (mode button)

Sayfayı Yazdır

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY



This installation guide is provided as a GENERAL installation guide, some vehicles vary and

may require additional steps. We do not accept responsibility for third party labor charges

or modifications. Exercise due-diligence when installing this product.



We do not accept any responsibility for vehicle damage or personal injury resulting from

the installation of this product.

Careless installation and operation can result in equipment damage



Requirements:

CD CHANGER CONTROLLING RADIO

Introduction

The A2DIY-CHRY02 wirelessly connects mobile devices to Chrysler radio system

allowing for Smartphone hands-free calls, music streaming, turn-by-turn

navigation, and more. A wireless connection means no wires, clutter or

complicated setup. The A2DIY-CHRY02 plug-n-play solution connects to the 10-

pin CD changer/Sat radio port which guarantees to best possible sound. In

addition to Bluetooth, users can also connect and play other devices through the

module AUX input jack and use included wireless remote to switch between

sources, adjust volume, change tracks and more.

See Frequently Asked question at the end of this guide for details.

Installation

Radio must be removed from dashboard to gain access to the connectors.

Vehicle specific radio removal is not part of this guide; however, they are

available upon request.

With radio out;

Connect installation harness 10-pin plug (See Fig. 1) to radio 10-pin

connector, (See Fig. 2)

Any factory option (satellite radio, CD changer etc.) already in place,

must be permanently disconnected.

Fig. 1

10-pin plug

Fig. 2

Radio 10-pin connector

Connect installation harness 8-pin plug (See Fig. 3) to module 8-pin

connector (See Fig. 4)

Fig. 3

Installation harness