Discount Car Stereo AUX-GM1 Hızlı Başlangıç Kurulum Kılavuzu - Sayfa 4

Araba Stereo Sistemi Discount Car Stereo AUX-GM1 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kurulum Kılavuzu indirin. Discount Car Stereo AUX-GM1 6 sayfaları. For select 1995-05 gm with separate (slave) tape, cd playeror cd changer

Sayfayı Yazdır

5. Drill a ¼" hole to dash/panel.

6. Fit jack threads through hole and secure with included nut (See Fig. 8)

Fig.7

Fig. 8

Warning: Jack may be left freestanding, but to be mounted, ensure

panel is no thicker than 1/8" otherwise shaft may not protrude enough

to engage with nut. If necessary, use dremel, sander etc. to thin panel,

Operation

Turn radio "ON",

2. Press "TAPE AUX" or "CD AUX "button

3. Load a CD or Cassette into slave unit

4. Connect audio device to 3.5mm jack using included 3 ft. audio cable or

similar (See Fig. 9).

5. Set audio device to play mode and ensure device volume is set to 80%

or higher.

6. Audio device will play on car speakers.

3.5mm audio cable

7. Use radio volume control button to set playback level.

Warning: Playlist and Track selection is *NOT* possible from radio

buttons. Use audio devices built-in controls to access and control audio

files and selection

8. To listen to separate or slave unit (CD, Cassette or CD changer), simply

disconnect audio cable (See Fig. 9) from jack (See Fig. 8) and operate

salve unit as customary. (Jack must be empty)

9. If correct operation is confirmed go ahead and reinstall radio.

(This step is required)

Fig. 9