Cub Cadet CC 2000 Operatör El Kitabı - Sayfa 3

Düzeltici Cub Cadet CC 2000 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Cub Cadet CC 2000 20 sayfaları. 2-cycle trimmer
Ayrıca Cub Cadet CC 2000 için: Parça Listesi (2 sayfalar)

Sayfayı Yazdır

Section 1

Safety

The purpose of safety symbols is to attract your

attention to possible dangers. The safety symbols,

and their explanations, deserve your careful attention

and understanding.

The safety warnings do not by

themselves eliminate any danger. The instructions

warnings they give are not substitutes for proper

accident prevention measures.

SYMBOL

MEANING

SAFETY ALERT SYMBOL:

Indicates

danger, warning, or caution. Attention

required in order to avoid serious personal

injury. May be used in conjunction

with

other symbols

or pictographs.

NOTE: Advises you of information or instructions

vital to the operation or maintenance

of the

equipment.

Failure to obey a safety warning

will result in

serious injury to yourself or to others. Always

follow the safety precautions

to reduce the risk

of f'_hock,

and

ersonal inju

, -

Failure to obey a safety warning

can result in

injury to yourself and others. Always follow the

safety precautions

to reduce the risk of fire,

electric shock, and personal

injury.

Failure to obey a safety warning

may result in

property damage

or personal

injury to yourself

or to others. Always follow the safety

precautions

to reduce the risk of fire, electric

shock, and personal

injury.

IMPORTANT

SAFETY INFORMATION

•

WARNING:

Engine Exhaust, some of its constituents, and certain vehicle components contain or

emit chemicals known to State of California to cause cancer end birth defects or other reproductive harm.

READ ALL INSTRUCTIONS

BEFORE

OPERATING

• Read the instructions carefully. Be familiar with the

controls and proper use of the unit.

• Do not operate this unit when tired, ill, or under the

influence of alcohol, drugs, or medication.

• Children and teens under the age of 15 must not use

the unit, except for teens guided by an adult.

• Inspect the unit before use. Replace damaged parts.

Check for fuel leaks. Make sure all fasteners are in

place and secure. Replace cutting attachment

parts

that are cracked, chipped, or damaged in any way.

Make sure the cutting attachment

is properly

installed and securely fastened. Be sure the cutting

attachment

shield is properly attached, and

positioned as recommended.

Failure to so can result

in personal injury to the operator and bystanders, as

well as damage to the unit.

• Use only 0.095 inch (2.41 mm) diameter genuine

manufacturer's

replacement line. Never use metal-

reinforced line, wire, chain, or rope, etc. These can

break off and become a dangerous projectile.

• Be aware of the risk of injury to the head, hands and

feet.

• Clear the area to be cut before each use. Remove all

objects such as rocks, broken glass, nails, wire, or

string which can be thrown or become entangled in

the cutting attachment. Clear the area of children,

bystanders,

and pets. At a minimum, keep all

children, bystanders and pets outside a 50 feet (15

m) radius; there still may be a risk to bystanders from

thrown objects. Bystanders should wear eye

protection.

If you are approached,

stop the engine

and cutting attachment

immediately.

• Squeeze the throttle control and check that it returns

automatically

to the idle position. Make all

adjustments

or repairs before using unit.

• Do not attach or operate this unit with any type of

brushcutting

blade or brushcutting

attachment as the

unit is currently setup. A brushcutter accessory kit is

available by the manufacturer. See Section

Maintenance

for the accessory part number. Use

only the manufacturer's

accessory kit.

SAFETY

WARNINGS

FOR GAS TRIMMERS

WARNING: Gasoline is highly flammable, and its

vapors can explode if ignited. Take the following

precautions: