Discount Car Stereo A2DIY-JAG98 Hızlı Başlangıç Bluetooth Kurulum Kılavuzu - Sayfa 11

Otomobil Aksesuarları Discount Car Stereo A2DIY-JAG98 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Bluetooth Kurulum Kılavuzu indirin. Discount Car Stereo A2DIY-JAG98 11 sayfaları. Bluetooth 1997-06 xk (x100)and 1998-03 xj (x308) with cd changer
Ayrıca Discount Car Stereo A2DIY-JAG98 için: Hızlı Başlangıç Kılavuzu (11 sayfalar)

Sayfayı Yazdır

4. After installing and testing the system everything works, but there is

engine "whine". (increases with RPM) What can I do to fix this?

Ensure all connections are snug.

If powering module with cigar lighter: remove any charging (e.g., USB)

device from cigar lighter port.

Relocate accessory wire (see phone plug chart on page 5)

Install suitable

noise

filter.

5. Which devices can be charged on optional charging kit?

Optional "Smart" USB charging kit supports BC1.2, QC2.0, QC3.0, PE1.1, PE2.0,

FCP, SFCP fast charge protocols (Apple, Samsung, Huawei etc.). iPhone

"Fast charge" kicks in when battery capacity is between 0- 79%, but

returns to regular charge mode when it reaches 80%.

6. How do I listen to the CD changer or AUX device?

To listen to CD's or AUX, press play/pause button on media button or from

audio device.

7. Can I connect the A2DIY-JAG98 audio module to the radio?

NO;

the A2DIY-JAG98 audio module connects to CD changer plug in luggage

compartment or hatch and Bluetooth module installs beneath armrest.

8. What is the vehicle application and where does audio module connect?

The A2DIY-JAG98 is specific to the following Jaguar vehicles:

1997*-03 (x308) (To CD changer plug in luggage compartment)

1997*-06 (x100) (To CD changer plug in luggage compartment)

9. I hear clicking sounds as I use my device, how can I stop this?

Go to device settings and disable touch sounds.

10. My module does not always pair when entering vehicle. How to I

remedy this?

Module may not pair if already paired to another device (last connected

device). Should this happen, check that no other device has already paired,

turn ignition off and back on or disable/re-enable Bluetooth on device.

11. It is possible to change device Bluetooth name to my own?

This may be possible on most Android devices but not so on recent

iPhones:

Make sure module is powered on and connected.

Go to Phone settings and tap Bluetooth.

Tap next Next then tap Name

Enter a new name (e.g. Jaguar-BT etc.) tap Done on keyboard, then tap

The custom name given now appears in Bluetooth settings of your device.

12. Playback is distorted, how do I fix this?

One likely cause for distorted playback is high volume setting on audio

device. To fix, turn radio volume up to comfortable level, then lower volume

on device until it no longer distorts.

13. I have older module version with push-button microphone and smart

remote. Will I be able to upgrade to new Bluetooth media button?

YES. Purchase Bluetooth media button here. Pair to smartphone/tablet and

enjoy. Push button will still function.

(Media button pause/play replicates push-button functions)

14. Callers can hear me, but I can't hear them- why?

One likely reason is the Smartphone call volume is set too low. Please raise

call volume level on your device to comfortable level.

*Late 1997 with Ai-NET CD plug only. Early 1997 with 8-pin DIN plug do not apply.

Disclaimer

• This product has no affiliation with Jaguar

• We're not liable for misuse of this product.

• Professional installation recommended

For help email

[email protected]

subject to change without notice. Other products and companies referred to herein are

trademarks or registered trademarks of their respective companies or mark holders.