Discount Car Stereo A2D-STS Hızlı Başlangıç Kurulum Kılavuzu - Sayfa 2

Araç Video Sistemi Discount Car Stereo A2D-STS için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kurulum Kılavuzu indirin. Discount Car Stereo A2D-STS 6 sayfaları. For 2005-11cadillac sts with xm tuner module u2k

Sayfayı Yazdır

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY



This document is provided as a GENERAL installation guide, some vehicles vary and may

require additional steps. We do not accept responsibility for third party labor charges or

modifications. Exercise due-diligence when installing this product.



We do not accept any responsibility for vehicle damage or personal injury resulting from the

installation of this product.

Careless installation and operation can result in equipment damage



Requirements

XM tuner module with or without subscription

Introduction

Many 2005-11 Cadillac STS owners with tons of music and application on smart

device will be pleased to find this module. The A2D-STS Bluetooth music streaming

module uses the radio's XM port to stream music applications from A2DP enabled

devices (e.g., Smartphone, Tablet, Kindle etc.) Simply connect the A2D-STS to the

back of the radio, pair audio device and stream all applications (e.g., music, GPS,

audio books etc.) on the 6-CD changer or 6-DVD navigation radio. For the A2D-STS

to work, vehicle must have an XM module (with or without subscription).

If subscribed, select "Subscribed", if expired, select "Not subscribed"; however,

if not currently subscribed but plan to renew at a later date; select

"subscribed" otherwise XM will not play upon activation.

*Not subscribed means vehicle has XM module but no service.

See Frequently Asked question at the end of this guide for details

Installation

Radio removal required to gain access to the connectors.

Using a panel removal tool, unclip and remove the top A/C vents panel

(See Fig. 1)

Remove 10mm screws securing radio to dash (See Fig. 2)

Pull radio forward, turn to reveal wiring (See Fig. 3, 3A)

Fig. 1

Fig. 2

Fig. 3

non-navigation radio