Cub Cadet 19A70019100 Kurulum Kılavuzu
Çim ve Bahçe Ekipmanları Cub Cadet 19A70019100 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Cub Cadet 19A70019100 2 sayfaları. Lawn striping kit
Sayfayı Yazdır
19A70019100 lawn striping kit is designed for use with three-
blade fabricated cutting decks found on select Cub Cadet
models. Refer to your machine's Operator's Manual or consult
your Cub Cadet dealer to assure compatibility.
Carton Contents
Before beginning installation, remove all parts from the carton to
make sure everything is present. Carton contents are listed below
and shown in Figure 1-1. Part numbers are shown in parentheses.
•
One 25.75" Pin
•
One Hex Lock Nut
•
Six 3⁄4-inch Screws
•
Four Rollers
•
Three Roller Brackets
•
Two Roller Brackets
•
One Roller Bracket
48-inch decks
WARNING:
Before beginning installation, place
the tractor on a firm and level surface, set the
parking brake, place the PTO in the disengaged
(OFF) position, stop the tractor's engine and remove
the ignition key to prevent unintended starting.
CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Printed In USA
I
nstallatIon
Lawn Striping Kit — 19A70019100
(711-05664)
(712-3083)
(710-0623)
(731-3005)
(703-08454)
(703-09618)
(703-08076)
54- and 60-inch decks
Figure 1-1
M
anual
Bracket Installation (48-inch decks)
Note: Removing the cutting deck from beneath the tractor
as instructed in your tractor's Operator's Manual will ease
installation of this kit.
1.
Locate and discard the three identical roller brackets used
for 54- and 60-inch decks.
2.
Secure the two identical roller brackets for 48-inch decks
to the rear left and rear center of the cutting deck with self-
tapping screws. See Figure 1-2.
3.
Secure the remaining roller bracket for 48-inch decks to the
rear right and of the cutting deck with self-tapping screws.
See Figure 1-2.
Figure 1-2
Form No. 769-06205
October 11, 2013