3d XPRO 490 Kullanıcı El Kitabı - Sayfa 14

Tekne 3d XPRO 490 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. 3d XPRO 490 17 sayfaları.

Beaching

We recommended the boat not to be powered onto the beach, dragged accross rocks, sand,

gravel or pavement as damage to the fabric and / or hull may result.

OUTBOARD MOTOR :

Install the outboard motor on the transom so that it is positionned as close to the center as

possible. Tighten the transom clamp screws evenly and securely. Occasionally check the clamp

screws for tighness during operation of the outboard motor because they could become loose

due to engine vibration. It is wise to tie the engine to the transom as well as clamping eyes are

provided. Always use the kill switch lanyard properly.

The portable tank should be removed from the boat when fuelling. The tank should be filled in

a ventilated area.

Do not smoke aboard.

Warning

Overpowering a boat can result in serious injury, death or boat damage. Do not use out-

board that exceeds the maximum horsepower given on the motor plate.

General care :

Your inflatable has been especially designed to avoid maintenance problems os far as possible.

However, periodic cleaning will help to keep your boat's good condition especially before winter