DiscountRamps BC-8407-2 Talimatlar

Otomobil Aksesuarları DiscountRamps BC-8407-2 için çevrimiçi göz atın veya pdf Talimatlar indirin. DiscountRamps BC-8407-2 2 sayfaları. Spare mount bike rack

Sayfayı Yazdır

Remove the spare tire from the car.

Tire Width (read the size located at the side of your tire)

195mm-235mm - Use the short connecting tube

235mm-275mm - Use the medium connecting tube

285mm-12.5" (318 mm) - Use the long connecting tube

Some tires must require the use of connecting tubes with different sizes of these above. If you can not

tighten rack properly, then use a shorter connecting tube. On the other hand, if you can see the tick

mark line, use a longer connecting tube.

Install the connecting tube to the back plate. Caution: select

the right size of the connecting tube according to the chart.

Install the back plate onto the car. You may need to position

the back plate according to the position of the bolts.

Secure the upper part of rack to lower part with

bolts and nuts.

INSTRUCTIONS

Spare mount bike rack

MODEL: BC-8407-2

×1

×2

Install the tire back to car. Tighten it with the nuts.

Use the locking knob to secure the rack to car.

Caution: please double check that the tick mark line (shown with red line) is fully covered.

If it is not covered, please change to longer connecting tube.

×1

change

×1