Arnica Bitkidem Kullanıcı Kılavuzu - Sayfa 9

Mutfak Aletleri Arnica Bitkidem için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Arnica Bitkidem 17 sayfaları.

- If the insulation function has been not selected, the kettle will be lifted up from the base to enter into

the standby state, so the program will be initialized.

- In case of the insulation function selected, if the kettle is lifted up from the base, this state before

lifting will be kept; if the base can not detect the kettle within one minute, the beep sound will be given

to enter into the standby state and the program will be initialized; if the base can detect it within one

minute, the front lifting will continue on.

- In standby mode, all LEDs are off and the heating process stops.

- In standby mode, if there is no kettle on the base, all buttons and indicators disable.

E. CLEANING and MAINTENANCE

Cleaning:

• Before cleaning, please carefully read the "Warning" section;

• Before cleaning, remove the power plug and allow the kettle cool;

• Wipe the kettle outside and bottom cover with a damp cloth and then dry it with dry cloth. Do not use rough

cleaning materials, otherwise it will scratch the kettle body.

• Clean and remove the debris and attachments with the soap water or cleaning agent rather than strong

acids or other corrosive detergent.

Descaling:

• Descale the kettle regularly to ensure a longer product life;

• At least descale twice each year in normal use;

• Add the vinegar to the MAX level shown in water gauge and boil;

• Cut off the power (remove the power plug);

• Add the cooked vinegar into the kettle for one night and then drain;

• Add the water to the MAX level shown in water gauge to boil and then drain; after that, rinse the remaining

dirt and vinegar off;

• Wash the kettle with cleaning water for descaling.