DISCOVER DRY CELL Kullanım Kılavuzu - Sayfa 4

Kamera Aksesuarları DISCOVER DRY CELL için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DISCOVER DRY CELL 11 sayfaları. Valve regulated lead acid battery

DISCOVER DRY CELL Kullanım Kılavuzu

1.6 Do's

• Do protect terminals from short circuit before, during, and after installation
• Do wear electrically insulated gloves
• Do use electrically insulated tools
• Do wear eye protection
• Do wear safety toe boots / shoes
• Do handle battery carefully
• Do secure battery safely

1.7 Do Not's

• Do not add water to the battery
• Do not immerse battery in water
• Do not lift or carry the battery during usage or operation
• Do not operate or store battery outside of operating limits
• Do not short circuit battery
• Do not puncture battery
• Do not expose battery to flames, or incinerate
• Do not open battery case or dissemble battery
• Do not wear rings, watches, bracelets or necklaces when handling or working near battery
• Do not drop or crush battery
• Do not lift battery by the terminal cables
• Do not vibrate battery
• Do not expose battery to water or other fluids
• Do not expose battery to direct sunlight
• Do not dispose of battery
• Do not connect with other types of batteries
• Do not expose battery to high temperatures
• Do not install with other battery types or brands

2. Delivery and Storage

2.1 Receiving and Inspection
• Inspect for missing components.
• Check against the shipping/packing documents.
• Inspect each package or pallet for integrity and electrolyte leakage.
• Record receipt date and inspection data results, and notify your servicing dealer of any damage. Take photographs if
necessary.

2.2 Storage

• Store in a dry, clean, ventilated, cool and frost-free location.
• Do not expose to direct sunlight as damage to the container and cover may occur.
• Do not stack pallets on top of each other and on sharp-edged supports.
• Storage on a pallet and wrapped in plastic material (shrink wrap) is permitted except when room temperature fluctuates
significantly, or when high relative humidity can cause condensation under the plastic. Condensation can cause a whitish
hydration on the terminals to form and result in current leakage and self-discharge.
• Protect against any risk of electric shock from short- circuiting poles/terminals with conductive objects or from the buildup
of conductive dust.
• Maintain the same storage conditions for all batteries within the same batch. Depending upon storage conditions and
temperature, storage time may be limited.
• If lead acid batteries are to be stored for extended periods of time, they must be placed fully charged.
• To prevent over discharge during storage, do not store batteries for more than 6 months at 20°C/68°F or 3 months at
30°C/86°F before performing a re-fresh charge. Failure to observe these conditions may result in significantly reduced
capacity and service life
• Record dates and conditions for all charges during storage.
4
discoverbattery.com
3