DISCOVER D904 Manuel - Sayfa 12

Kulaklıklar DISCOVER D904 için çevrimiçi göz atın veya pdf Manuel indirin. DISCOVER D904 19 sayfaları.

3.9 Making a conference call

Your Discover D904 headset allows a second

headset to be temporarily connected to the

base so that you can have a three way

conference call.

•

Setup the call using the primary headset unit.

•

Once on the call, place the second IPN

DECT headset unit on the base charger.

•

After about one second, the headset

'IN USE' LED (1) of the new headset will turn

on and the base 'IN USE' LED (5) will flash to

indicate the headset is registering with the

base unit.

•

Once the registering has completed, the base

'IN USE' LED (5) will stop flashing and the

additional headset LED will flash.

•

Once the registration has completed, a

confirmation sound will be heard on the

primary headset.

•

Lift the additional headset from the base and

it will enter talk mode. The two headsets are

now in conference mode.

NOTE: The additional headset will only remain

registered to the base for the duration of the call.

After the primary headset has ended the call, the

unit will return to its normal state.

The Discover D904 headset also allows you to make

a conference call between your normal phone and a

PC or MAC computer.

To activate this option hold down the PC/USB switch

(8) for four seconds. Both LEDs of the PC/USB (8)

and TEL (7) buttons will light. If one of the buttons is

touched again this function will be switched off and

the headset will return to the mode of the button

pressed.

headsetadvisor.com | 1-800-683-5715