Blake UK PROCEPTION PROAPW300L Gelişmiş Talimatlar - Sayfa 7
Kablosuz Erişim Noktası Blake UK PROCEPTION PROAPW300L için çevrimiçi göz atın veya pdf Gelişmiş Talimatlar indirin. Blake UK PROCEPTION PROAPW300L 15 sayfaları. In-wall and ceiling high speed access points
Ayrıca Blake UK PROCEPTION PROAPW300L için: Manuel (2 sayfalar), Kullanıcı Kılavuzu (20 sayfalar)
Sayfayı Yazdır
PROAPW300L- 300Mbps 2.4GHz In Wall Access Point
with RJ45 Port
PROAPW750L- 750Mbps 2.4 & 5GHz In Wall Access Point
with RJ45 Port
PROAPCEILING- 1200Mbps 2.4 & 5GHz Ceiling Access Point
Advanced Instructions
WISP mode:- Wirelessly connects to a WISP (Wireless Internet Service Provider) AP.
In this mode, the AP also acts as a router for wired clients on your LAN and provides
NAT (Network Address Translation) and a DHCP server to generate IP addresses for
wired clients only. NAT and the DHCP server allow many computers to share the
same wireless Internet connection.
AP mode:- Using Access Point mode is ideal if you want to extend the Wi-Fi range,
but the router you're using to extend it isn't too far away from the main central
router. The cable will ensure you get the best possible speeds between the access
point and the router, and you do not have to worry about anything interfering with a
Wi-Fi signal.
Setup screens in Gateway mode
Setup screens for Repeater mode
How the AP is allocated an IP (Default is DHCP)
Scan, select SSID & enter password of the wi-fi
Select where Wi-Fi signal is repeated from
Setup screen in Wisp Mode
Select how AP gets it's IP (Default is DHCP)
www.blake-uk.com
0114 223 5000
PD2011-8246-04