Blake UK PROCEPTION PROAPW750L Kullanıcı Kılavuzu - Sayfa 6
Kablosuz Erişim Noktası Blake UK PROCEPTION PROAPW750L için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Blake UK PROCEPTION PROAPW750L 20 sayfaları. In-wall and ceiling high speed access points
Ayrıca Blake UK PROCEPTION PROAPW750L için: Gelişmiş Talimatlar (15 sayfalar), Manuel (2 sayfalar)
Sayfayı Yazdır
Setup on Your PC Using Wi-Fi
1.
By default, the AP is in gateway mode and you can connect to the device by joining its Wi-Fi
network and simply using the default IP 192.168.188.253
2.
Open browser, input IP address 192.168.188.253 and log into the WEB GUI using the default
password of 4wG7cZXd. If you're reading this on a computer click here
Setup on Your PC Using A Network Lead
1.
By default, the AP is in gateway mode.
2.
Connect the PC to the AP LAN Port.
Set a static IP on PC of 192.168.188.250 and set the gateway to 192.168.188.253.
3.
Open browser and enter IP address 192.168.188.253 and log into the WEB GUI using the default
password of 4wG7cZXd. If you're reading this on a computer simply click here
http://192.168.188.253
Remember to reset the network of the PC back to DHCP once you have completed setup or you may
not be able to connect to other networks.
Access On Your PC Using The Local Network
Once the access point has been setup, one of the easiest ways to access the admin screen is by
scanning the local network for the access point. The access point has a GUI that runs on port 80, making
access and alterations very easy.
Install a network scanner (We suggest Advanced IP Scanner from https://www.advanced-ip-
scanner.com ) and run the software.
Locate the MAC address of the AP (You can find this on the rear of the AP and looks something like
xxx:xxx:xxx:xxx)
Now using the software, scan the network and look for the MAC address, this will give you the IP that's
been allocated to the access point by the router.
Type this number usually starting 192.168.***.*** into your internet browser and the web login screen will
appear.
The default password is 4wG7cZXd. If the password has been changed and lost then you will require to
reset the AP.
6 Blake UK Ltd. 177-187 Rutland Road, Sheffield, South Yorkshire S3 9PT | 0114 223 5000 | www.blake-uk.com
http://192.168.188.253