3D Creations North American P 51 D Mustang Montaj Talimatları Kılavuzu - Sayfa 13
Oyuncak 3D Creations North American P 51 D Mustang için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. 3D Creations North American P 51 D Mustang 15 sayfaları. Paper scale model kit
Sayfayı Yazdır
Cut out part #21 the canopy. Take care not to cut the
gluing tabs off while doing this. Fold the windscreen
sections back 90- degrees. See figure 38. Using the
cupping technique to draw the sections together glue
the canopy to shape. After the glue is set work the
Canopy Assembly
canopy into shape by drawing in the
sides and rounding the top along the
length of the piece.
No glue tabs are to be folded. The tab at
the rear of the canopy should be curved
slightly to make it easier to glue to the
fuselage. Apply glue to the back of the
glue tabs and to the inside edge of the
canopy. Carefully align the canopy on
the fuselage and glue it in place. Press
the canopy edges on to the fuselage.
Work front to back so there are no gaps
between it and the fuselage. See figure
39.
13