3D Fun Printz Cord Holder Manuel - Sayfa 2

Yazıcı Aksesuarları 3D Fun Printz Cord Holder için çevrimiçi göz atın veya pdf Manuel indirin. 3D Fun Printz Cord Holder 3 sayfaları.

To mount the holder screw the top into the base all

the way and then

UNSCREW HALF A TURN.

The

holder needs to be able to swivel slightly once it is

mounted. This allows for movement of the cord as

the machine foils.

Remove the plastic from the sticky pad on the back

and mount the holder so the slot in the holder is

pointing front to back on the machine, not side to

side.

TIP – The plastic is cut in half to make it

easier for you to remove

You can then push the USB plug through the slot in

the cord holder. You may need to wrap the cord label

around the cord to push it through.

Make sure there

is enough cord to allow the machine full movement

side to side.