Cube Mountain Bike Montaj Kılavuzu - Sayfa 12

Bisiklet Cube Mountain Bike için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. Cube Mountain Bike 16 sayfaları.

Assembly Manual

VIII. Test run

Your new mountain bike is now ready to ride

and you should take it out for a test run straight away. (Fig. 31)

Fig. 31

Important: Before heading out, please check that all of the

screw fittings and quick release skewers on your mountain bike

are tight. Test out the suspension to ensure that it is working

correctly and has sufficient suspension tension.

Important: In your own interest, we would recommend that

you have your bike inspected after approx. 100 km. Bikes cannot

correctly adjusted without a certain period of running-in.

Mechanical components, like brakes, gears and bearings have to

be checked and readjusted after a certain time. An initial

inspection by qualified technicians will guarantee that your

bike has a long life so that you can enjoy unlimited cycling

enjoyment.

Important: Keep a note of your frame number!

The frame number is generally located on the

bottom bracket – the position may vary with different

manufacturers (seat pin, head tube). It is easiest to note down

your frame number on the invoice for your bike.

Attention: Mountain bikes, which do not have lights, do not

comply with the requirements of § 67 of the German Road Traffic

Licensing Regulations (StVZO). Please be aware that these

sports bikes are not permitted to travel on public roads.

Attention: It is essential that you also read the manufactur-

ers' operating manuals to fully understand all of the technical

features of your bike.

Have fun with your new bike!

Mountain Bike