3D Global DTC133UHL Çalıştırma Talimat Kılavuzu - Sayfa 5

Monitör 3D Global DTC133UHL için çevrimiçi göz atın veya pdf Çalıştırma Talimat Kılavuzu indirin. 3D Global DTC133UHL 18 sayfaları.

1 General

Thank you for purchasing this device.

Please read this instruction completely and carefully before initial unpacking and

commissioning, because it contains, among other things, important information for

unpacking, commissioning and using the device.

3D Global Solutions GmbH reserves the right to make changes to its products, their

documentation or specifications without prior notice. All information and functions described

in this document refer to the device status (hardware & software) at the time of delivery ex-

factory. Functions or behavior of any updates carried out subsequently are not described in

this operation instruction.

All information given here has been carefully checked, but no guarantee can be given for its

correctness and/or completeness.

The purpose of this user manual is to assist you in commissioning and operating the device.

In addition, this document is intended to draw your attention to possible risks during

unpacking, commissioning and use of the device, and to highlight measures for avoiding

risks.

If you do not fully understand any points in the operation instruction or if you have any

questions, please contact the Support department at 3D Global Solutions GmbH.

A lack of or insufficient knowledge of this user manual will result in the loss of any liability

claims against the manufacturer.

The datasheet belonging to and supplied with this product is an integral part of this operating

instruction. Both documents are part of the device and must therefore always be kept within

easy reach near the device.

The latest documents are available for download at

www.3d-global.com.

Please check this

page from time to time for information on the latest changes.

Manual_DTC133UHL_EN

Rev. 1.0 / 17.11.2022

5 / 18