Arnu Box MACH 10 64BIT Kullanıcı Kılavuzu - Sayfa 7
Medya Oynatıcı Arnu Box MACH 10 64BIT için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Arnu Box MACH 10 64BIT 15 sayfaları.
Sayfayı Yazdır
SECTION 2
ARNU Box™ - ANDROID™
Menu Interface
My Videos:
Access locally stored videos or videos from a networked hard drive or
SD card
My Pictures:
Access locally stored pictures or pictures from a networked hard drive
or SD card
My Music:
Access locally stored music or music from a networked hard drive or
SD Card
Edit Feeds:
Access the Filmstrip feeds and add or drop feeds from the Filmstrip.
Edit Layout:
Allows users to add widgets by selecting open spaces in the top right
corner, change background images, edit the Filmstrip and remove
apps from the launch area. Navigate the screen using the remote
directional buttons.
Settings:
Accesses basic Android
Help:
Access the ARNU Box™ Forum Board via the Web Browser
Adding Android™ Apps on Code Red
In order to add Android
™
apps to the Code Red Launch area at the bottom of the
screen navigate to the plus sign in the left hand corner of the screen. Select this and
press OK. Once in the Android
™
menu select your preferred apps and press OK.
09
™
Settings
SECTION 2
ARNU Box™ - ANDROID™
2.4
Toggling Between Internet Options Ethernet and Wifi
During the initial setup of your ARNU Box™ Android
to set up the box using the device's Wi-Fi or a hard wired Ethernet connection. If you
choose one option you can change the internet connectivity method at a later time.
Just follow these directions.
Turning off a Wifi Connection and Activating and Ethernet
Connection
1.
From the main context menu, on the upper left hand of the screen, highlight
settings using the directional buttons and press OK.
2.
Press the right directional button once to the right and once up to select the
"ON" panel
3.
Press ok to turn the Wi-Fi OFF
4.
Insert a working network cable into the Ethernet port on the back of the device.
5.
Insert the other end of the network cable into an open port on an internet
connected router
6.
Press the reverse arrow button located above the volume controls
7.
Using the direction buttons highlight Ethernet and press ok
8.
Press right on the directional button until you have reached the "OFF" button in
the far right corner
9.
Press OK to turn it on
Turning off an Ethernet Connection and Activating Wi-Fi
Connectivity
1.
From the main context menu, on the upper left hand of the screen, highlight
settings using the directional buttons and press OK.
2.
Press the right directional button twice to select the "ON" panel
3.
Press OK to turn the Ethernet connection OFF
4.
Press the reverse arrow button located above the volume controls
5.
In the wireless and Networks menu use the directional buttons to select W-Fi
6.
Press the right directional button to select the panel marked "OFF"
7.
Press OK to turn it on
8.
Press the right directional button to highlight the recycle icon and press OK (this
will refresh your available Wi-Fi networks
9.
Choose your network and press ok
10.
When prompted enter your valid network key or password and allow the system
to connect
™
set-top box you have a choice
10