Cube FC2020-P1 Hızlı Kullanım Kılavuzu - Sayfa 13

IP Kamera Cube FC2020-P1 için çevrimiçi göz atın veya pdf Hızlı Kullanım Kılavuzu indirin. Cube FC2020-P1 20 sayfaları.

Finding IP Camera by using "AVer IPCam Utility"

1. Use the software, "AVer IPCam Utility" to assign the IP address of the IP camera. The software is

in the attached software CD.

2. Run the IPCam Utility

3. Select the proper network adapter and click [Search] to begin searching.

4. Select and double click the IP camera you want to access. If you want to change the setting of the

selected IP camera, enter the user ID, correct password, and change the settings and then click

Apply button. This will change the setting and rescan the network again.