AROFLY A-Plus Meter Hızlı Başlangıç Kılavuzu

Bisiklet Aksesuarları AROFLY A-Plus Meter için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. AROFLY A-Plus Meter 2 sayfaları. Gps cycle computer (bluetooth)

Sayfayı Yazdır
All manuals and user guides at all-guides.com
DISPLAY
Icon Information
PACKAGE CONTAIN
A-Plus Meter
Bracket & Rubber
Rubber Ties X 4
Extension Arm
Hex Wrench
Specification
Product Name
A-Plus Meter
Size
47.5 mm x 71 mm x 22.5 mm
Weight
53.2g
Operation Temperature
0ºC to 50ºC
Battery
Rechargeable Battery
Frequency
BLE4.0
Water Proof
IPX6
SETTING MODE
Press Set key for 3 seconds to open setting
function.
7.SET CLOCK
8.LANGUAGE
to open setting
to open setting
to select
to select
AUTO DETECT /
language
MANUAL SET
to confirm
In AUTO DETECT
to change 12
Hour / 24 Hour.
to
GMT mode.
In MANUAL SET
to select 12
Hour / 24 Hour.
to
set clock.
to
adjust number
Press
to save
and leave.
PAIRING WITH AROFLY SENSOR
1.Get ready of AROFLY Sensor
Place Wrench onto the
Pull and remove Insulation
AROFLY Base. Twist
Tab from AROFLY to
counter-clockwise to open
connect battery. Replace
AROFLY Cap.
the cap to AROFLY.
2.Enter "SET MODE" OF A-PLUS Mete
r
STEP2: Press
to
Step1: Press Set key for
page 4 of "SET SENSOR"
3 seconds to enter "SET
MODE"
GPS Cycle Computer (Bluetooth)
Quick Start Guide
Quick Start Guide
KEYS
: Touch to change the sub mode.
•
: Press Mode key to change to different mode:
Bike Mode → Cadence Mode → Heart Rate Mode → Power Mode → Altitude Mode
Press and hold Mode key for 3 seconds to clear trip distance, trip time.
•
: Press record key to start recording the ride, press again to stop recording.
• Press and hold
Meter.
MOUNTING COMPUTER
Tighten the extension arm on handlebar with hex
wrench, please apply the rubber pad according to the
dimension of the handlebar.
Micro USB Cable
Set A-Plus Meter
Set key: Press Set key for 3 seconds to access or to exit the setting menu.
Use
to browse from one setting to the other.
To access the selected setting, press
.
Select the desired setting with
to adjust the value and
Press
to go back to setting menu.
1.SET ALTITUDE
2.SET BACKLIGHT
3.SET SENSOR
to open setting
to open setting
to open setting
to select
to select
to start
AUTO DETECT /
BUTTON ON / ALWAYS
searching sensor
MANUAL SET
ON / ALWAYS OFF
to change sensor
to confirm,
to confirm
to confirm
under MANUAL SET,
press
to
change number,
to change digit
to confirm
9.SET USER
10.SET UNIT
11.SET KEYTONE
to open setting
to open setting
to open setting
to select
to select
to select On /
MALE / FEMALE,
to
Metric / Imperial,
to
Off
next setting
next setting
to confirm
to adjust age,
to select ºC /
to next setting
ºF
to select KG /
to confirm
LB,
to next setting
to adjust
weight
to confirm
Step 3: Press
to set
Step 4: Press
to
AROFLY Sensor
SEARCH AROFLY code.
Step 5: Wake up AROFLY Sensor for code pairing on
A-PLUS Meter
Action: Tap AROFLY Sensor few times
to wake up AROFLY for Bluetooth
transmission. A-PLUS Meter will
automatically search AROFLY code.
Attention
* Please pair AROFLY Sensor with A-PLUS Meter before first riding.
* After successfully paired, please correctly install AROFLY Sensor on your bike tire valve by following AROFLY manual.
* For Reconnection, just turn on or wake up A-PLUS Meter and simultaneously wake up AROFLY Sensor by slapping your bike saddle
or vibrate your bike tire.
* AROFLY Sensor can be used either by Smart Phone of AROFLY APP (See AROFLY manual) or A-PLUS Meter. But AROFLY cannot be
used with 2 devices (Smart Phone and A-PLUS Meter) simultaneously.
Set
Next
and
for 3 seconds to Turn on or Turn off this A-PLUS
Charging Battery
1. When the function list displays: BATTERY EMPTY, it means
the device power is low and needs to recharge, the device
will force to shut down.
2. Use the USB cable in the package to charge the bike
computer.
to switch interval.
4.SET BIKE TYPE
5.ROLLER MODE
6.AUTO WAKE UP
to open setting
to open ROLLER
to open setting
MODE
to select
to select On /
ROAD BIKE / MOUNT
to select On /
Off
BIKE / SMALL WHEEL
Off
to confirm
to go to SET WHEEL
to confirm
to select
Attention:
TIRE LIST / MANUAL
Be sure to OFF Roller
SET, Under MANUAL
Mode while riding
SET, press
to
outdoor
adjust number and
to next digit
to confirm
12.SET ODO
13.FACTORY DEFAULT
14.ABOUT
to open setting
to open setting
to open setting
to adjust
To Delete, press Y
to view next
value
to next value
(
), to leave,
information
press N (
)
to confirm
to confirm
To Confirm delete, press
Y (
), to leave,
press N (
)
AROFLY Sensor paring success: It shows SENSOR LINK
and follows by 6 digits code.
If device fail to receive AROFLY code, it will show: ID NOT
FOUND
Try again
Confirm and go back
to SETTING MODE
Please try again by the movements:
Press
to Search again. In the meantime, please
again tap AROFLY Sensor few times for signal transmission
to be searched by A-PLUS Meter.