CUBE in-a-box V1.series Detaylı Montaj Talimatları - Sayfa 5

İç Mekan Mobilyaları CUBE in-a-box V1.series için çevrimiçi göz atın veya pdf Detaylı Montaj Talimatları indirin. CUBE in-a-box V1.series 6 sayfaları.

Sayfayı Yazdır
10
11
12
13
14
- 3 -
Use the leveler to adjust the
work-top and brackets.
You may use an electric drill
to screw the work-top. Use
the black wood-screws.
Place the raceway cover on
top of the plastic cavaliers
on each side of the panel.
To close the raceway cover,
push down on each side of
the cover until it clips in.
Slide/adjust shelf supports
into posts B at the height of
your choice. You need to
tighten the chromed-screw
to make it hold.
Display the shelf on top of
the shelf-supports.
Push vertically on each of
the black plastic brackets
until it fits in, then push the
shelf all the way toward the
panel.
Use the leveler to adjust the
shelf-supports height.
Display the book-holders as
per the holes.