Discovery Labs Warming Cradle 801-000 Kullanım Kılavuzu - Sayfa 16

Laboratuvar Ekipmanları Discovery Labs Warming Cradle 801-000 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Discovery Labs Warming Cradle 801-000 20 sayfaları. Dry block heater

Sayfayı Yazdır

Frequently Asked Questions

Q: What happens if a vial is not inserted after WARMING

CRADLE

has preheated?

A: If a vial is not inserted into WARMING CRADLE once it reaches the

factory preset temperature of 44°C

maintain the preheated temperature indefinitely. There is no on/off

switch. The LCD will continue to alternate between "Insert" and "Vial"

and the LEDs will remain steady GREEN. The unit should remain plugged

in between uses to maintain the preset temperature of 44°C

be ready to use at all times.

Q: What happens if the vial is not removed from WARMING

CRADLE after the 15-minute warming cycle is completed?

A: If a vial remains in the vial reservoir after the 15-minute warming

cycle completes, WARMING CRADLE will continue to warm at

44°C

1°C, the LEDs will flash GREEN, the timer will continue, and

a 2-tone signal will sound repeatedly until the vial is removed.

Q: Should WARMING CRADLE be unplugged between uses?

A: WARMING CRADLE is designed to remain plugged in at all times

so that it will remain ready to receive and warm vials.

Q: If WARMING CRADLE remains plugged in, does it shut off

automatically?

A: There is no automatic shut-off feature on WARMING CRADLE.

WARMING CRADLE is designed to remain plugged in at all times.

It will remain preheated and in the "Insert Vial" mode until a vial is

inserted.

Q: What does it mean if the LEDs are steady RED, the LCD shows

"Service Required Immediately," and a loud continuous beep

sounds?

A: This combination of readings means that WARMING CRADLE

needs service and should be replaced. Unplug WARMING CRADLE

and contact Discovery Laboratories, Inc. toll free at 1-877-787-3296.

1°C, WARMING CRADLE will

1°C and