CUBETAPE C190POS Kullanıcı Kılavuzu
Barkod okuyucu CUBETAPE C190POS için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. CUBETAPE C190POS 4 sayfaları. Parcel dimensioner
Ayrıca CUBETAPE C190POS için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Yapılandırma Kılavuzu (18 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
Quick Start Guide for C190SHP,
C190POS, C190DSK – Page 1
Contents of C190SHP:
Cubetape
C190 POS
Installation:
Powering On/Off and Bluetooth Pairing:
• Power on Cubetape by pressing and holding m button for 3 seconds
Power off Cubetape by pressing and holding m button for 6 seconds
• To pair with cradle, scan the pairing barcode on the front of the cradle
• Connection is successful when the Blue LED indicators on Cubetape and
the cradle are permanently ON. If the Blue LED indicators continue to
flash, re-scan the Bluetooth pairing barcode on the cradle.
• Cubetape will remain ON while it has an active Bluetooth connection,
otherwise it will power OFF after around 3 minutes
Operations and Measuring:
Extend the tape, press the
'm' button
to scan the barcode
measurement on the tape
•
Blue LED indicators are on permanently when
connected
•
To scan a barcode ID, press 'm'
# 2018001
C190DSK
Cradle
PC
USB
Cable
Quickstart
Guide
DIP switches beneath cradle:
Cradle
CORRECT
C190CRC
USB Cable
OFF
ON
COMMS MODE
USB-VPC
USB-HID
RESERVED
--
RESERVED
--
P airing
barcode
√
www.cubetape.com
DEFAULT
ON
--
OFF
--
OFF
INCORRECT
x