Discovery Telecom XD-1 Montaj Talimatları Kılavuzu - Sayfa 6

Oyuncak Discovery Telecom XD-1 için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Discovery Telecom XD-1 7 sayfaları.

Figure 14

Command Module

Figure 15

Figure 16

Figure 17

Form the 4 emergency engine tubes,

part 3, into cylinders. Attach to part 4 as

shown.

Score, cutout, fold and assemble parts 1

and 2. Attach 2 to 1, carefully noting

green alignment marks to complete the

Command Module.

Apply a bead of glue around the inside

of each of the emergency engine

cylinders (3) then attach to piece 2 by

holding the assembly vertical until the

glue dries.

Engines

Assemble the engines as shown.

Optionally substitute 1mm card for 12e.

Form part 13 first attaching the glue

tabs around the outside, then fold the

large flaps over the outside covering the

glue tabs. Form parts 14 into rings with

black on the inside.

Attach the center engine to the Reactor

Module (11). After glue is completely

cured attach the outer two engines.