Discteq 352U Kullanıcı Kılavuzu - Sayfa 8
Yerleştirme İstasyonu Discteq 352U için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Discteq 352U 14 sayfaları. Dual hdd clone docking station
Sayfayı YazdırThe LED lights will flash to indicate the cloning process (25% / 50% /75%
/100%) once the cloning process has reached the 100% it will change
from a flashing blue light to a static blue light which will indicate that the
cloning process is complete.
Before removing the hard drives from the cloning device we
strongly recommend that the device is powered off and the power
supply removed from the device.
Important Notes
To successfully use 2-in-1 Cloning the capacity of target hard disk must
be larger or the same the size as the original hard disk. (Please note
data cannot be cloned to a smaller drive).
Once you have pressed the copy button for the first time and the 100%
light is lit you must press again within 3 seconds to confirm the cloning
process.
Do not connect the USB/ESATA cables to the PC when the cloning
process is operational as this may cause corruption of the hard disks.
Do not connect the USB/ESATA cables at the same time whilst docking,
it must be one or the other BUT NOT BOTH
6