Aroma FlipGrill AHG-2233 Kullanım Kılavuzu - Sayfa 8
ızgara Aroma FlipGrill AHG-2233 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Aroma FlipGrill AHG-2233 12 sayfaları.
Ayrıca Aroma FlipGrill AHG-2233 için: Kullanım Kılavuzu (12 sayfalar), Kullanım Kılavuzu (12 sayfalar)
Sayfayı Yazdır
Using Your Flip Grill
To Make Raclette:
1.
Place the base on a sturdy, level surface.
2.
Place the stainless steel Raclette tray onto the base.
3.
Place the heating plate onto the base, grill or griddle side up as desired.
4.
Insert the temperature probe into the side of the heating plate, making sure
that it is properly attached and sitting squarely on the base.
5.
Plug the temperature probe into an electrical outlet.
6.
It is recommended to have all ingredients prepared before heating up the
grill/griddle, as it heats up quickly. Turn the temperature dial to the desired
position (see recipe for instructions). For best results, allow the grill/griddle
a few minutes to heat up before beginning to cook.
7.
Place thin slices of cheese onto each of the individual nonstick Raclette
trays. Slide the trays into the indentations on the stainless steel Raclette tray
(beneath the grill/griddle plate), taking care not to touch the heating plate
in order to avoid burns.
8.
Allow the cheese a few minutes to warm, then place remaining ingredients
to be cooked (will vary by recipe) onto the grill/griddle surface and cook
as desired. Do not use metal utensils, as they may damage the nonstick
coating.
9.
When ingredients are ready, serve onto plates. Slide the individual Raclette
trays out from beneath the grill/griddle plate and pour the cheese over the
other ingredients.
10. Repeat steps 6 through 9 as desired. When finished, turn the temperature
dial to "OFF" and immediately unplug the temperature probe from the wall
outlet.
11. Allow to cool completely.
12. When the appliance and trays have cooled, remove the temperature
probe from the grill/griddle before cleaning.
(See "HOW TO CLEAN" for cleanup instructions)
To Use as a Warming Tray:
1. Place the base on a sturdy, level surface.
2. Place the heating plate onto the base, griddle side up.
3. Insert the temperature probe into the side of the heating plate, making sure
that it is properly attached and sitting squarely on the base.
4. Plug the temperature probe into an electrical outlet.
5. Turn the temperature dial to the desired position between 1 and 4. DO NOT
turn above "4" when using as a warming tray.
6. Place appetizers or food to be warmed onto the griddle surface.
Continued on next page
6