CubuSynth Engine Oluşturma Kılavuzu - Sayfa 10

Müzik Ekipmanları CubuSynth Engine için çevrimiçi göz atın veya pdf Oluşturma Kılavuzu indirin. CubuSynth Engine 20 sayfaları. Dual complex vco with wave shaping and modulation features

Sayfayı Yazdır

CubuSynth Engine - Build Guide

PCB V1.1 May 2022

STEP 7 (Main PCB)

Polystyrene Capacitor

Place the Polystyrene (or other high quality) capacitors.

If it has a polarization, the marking on the capacitor should point towards the white line on the

PCB.

A normal ceramic cap will work as well, but since it may affect the stability of the VCO cores,

you should use high quality Plastic Film capacitors. Make sure, they are not taller than 10mm.

1n Polystyrene

C13,C5

Here is different types of

polystyrene capacitors

STEP 8 (Main PCB)

2N5457 Transistor

Place and solder the 2N5457 N-channel JFET.

Make sure the outline of the transistor matches with the silkscreen on the PCB.

2N5457

Page 10