Dish Network SuperDISH 121 Manuel - Sayfa 12
Anten Dish Network SuperDISH 121 için çevrimiçi göz atın veya pdf Manuel indirin. Dish Network SuperDISH 121 18 sayfaları.
Sayfayı Yazdır
1000.4 Dish - Assembly, Pointing, and Peaking
Rotate the cam clockwise until the highest possible signal is reached, repeat rotations if necessary.
о
IMPORTANT: Do not tighten the azimuth fine-tune cam.
о
1.
Tighten the three azimuth plate bolts labeled with a 'T' and reconfirm signal using the push pull method.
Complete Assembly
1.
Connect the receiver cable(s) to the DPP 1000.4 LNBF PORT 1 (and PORT 2 and PORT 3, as necessary).
2.
Run Check Switch test and confirm 61.5°W, 72.7°W, and 77°W reception.
3.
Take a software download, if you didn't already.
4.
Run a second Check Switch test and confirm 61.5ºW, 72.7ºW, and 77° reception.
5.
Install additional receiver(s), if necessary.
6.
If applicable, connect a second satellite dish to the DPP 1000.4 LNBF's LNB IN port.
2-8d