Dish Network VideoPath DP21 Kurulum Kılavuzu - Sayfa 10
Anten Dish Network VideoPath DP21 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dish Network VideoPath DP21 19 sayfaları. Multi-dish switch
Ayrıca Dish Network VideoPath DP21 için: Kurulum Hızlı Referans Kılavuzu (6 sayfalar)
Sayfayı Yazdır
If you still do not see the Satellite reception verified message,
7.
call the DISH Network Customer Service Center at 1-800-333-
DISH (3474).
Operating with a DishPro Compliant Splitter
When using a DishPro compliant splitter to split the signal from a
DishPro single LNBF (as shown in Figures 4 and 5), the receiver whose
DP21 switch is connected to the passing side of the splitter must be
plugged into a live power outlet at all times. If not, the DishPro single
LNBF will not have any power and will not be able to provide satellite
signal to the other receiver.
Wiring Diagrams
10
The wiring diagrams that begin on page 11 omit cable drip
loops and grounding for clarity. Make sure to use drip loops,
and to ground the system per the National Electrical Code
(NEC) and all local electrical codes.
The wiring diagrams that begin on page 11 show optional
splitters between the LNBFs and the DP21. Only use
DishPro compliant splitters. Use of splitters that are not
DishPro compliant may cause undesirable operation,
including loss of channels, black screens, and incorrect
Check Switch results.