Acoustic AB50 Kullanıcı Kılavuzu - Sayfa 6

Amplifikatör Acoustic AB50 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Acoustic AB50 8 sayfaları. 50 watt acoustic-electric bass amp

Acoustic AB50 Kullanıcı Kılavuzu

FRONT PANEL

1
1.
Combo 1/4" 2-conductor, dual bass inputs with integrated XLR mic jacks.
2.
Channel volume level control. If you are using a bass guitar with an on-board preamp, set its level
to mid position before increasing these controls, otherwise distortion may occur.
3.
Active low frequency control set to boost (12 dB) or cut (-12 dB) frequencies at 100 Hz.
Controls the lowest fundamental frequencies of your bass to enhance warmth and deep,
full tones.
4.
Midrange frequency control set to boost (12 dB) or cut (-12 dB) frequencies at 500 Hz.
Allows you to add thickness and body to your bass tones.
5.
A high frequency control set to boost (12 dB) or cut (-12 dB) frequencies at 10 kHz.
Adds or subtracts the high-end attack of slap-style sounds or picking.
6.
1/4" 2-conductor line out jack allows you to send a live signal to a mixing console or a
recording device.
7.
This 3-conductor 1/8" media input jack will allow you to plug in a CD, MP3 player or any other source
so you can play along or rehearse. To control the volume of the source, adjust the output volume of the
device. We suggest you turn the volume all the way down then plug in and adjust the volume according
to your taste.
8.
1/8" 3-conductor jack for plugging in headphones. When used, it will disconnect the internal speaker.
9.
When this jewel light is lit, your amp is on and ready to be played.
6
w w w . a c o u s t i c a m p l i f i c a t i o n . c o m
2
3
4
5
6
7
8
9