3D Printing Systems UP Mini Heater Bed v2 Kurulum Talimatları - Sayfa 3

3D Yazıcılar 3D Printing Systems UP Mini Heater Bed v2 için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. 3D Printing Systems UP Mini Heater Bed v2 3 sayfaları.

Sayfayı Yazdır
8.
Carefully slide the UP Mini Bed+
back into the printer across the
top of the spring loaded plastic
pins (circled), again taking care not
to scratch the top of the bed
against the metal rails that
secure the bed.
9.
Once the bed holes are aligned
with the plastic block of the build
platform, reinstall the screws.
10. Pressing down gently on the bed
to provide clearance, remove the
Mylar tape on each side of the bed
that was protecting the edges of
the heater element during
installation.