Dish TV S9020DVD Kullanıcı Kılavuzu - Sayfa 11
Alıcı Dish TV S9020DVD için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dish TV S9020DVD 12 sayfaları. Dvd+dvb-s combo receiver
User Interface of DVD Playback
1.3 SCREEN SETUP MENU
The system setup options are illustrated below:
(1) TV TYPE
According to the TV sype, you can choose
4:3PS, 4:3LB or 16:9
(2) TV SYSTEM
According to the Color System of the TV, you
can choose the TV System.
(3) VIDEO OUTPUT
According to the output jack of TV set, you can
choose CVBS, RGB.
(4) BRIGHTNESS
According to the Brightness, you can choose Normal, Bright or soft .
(5)
CONTRAST
Use the [Up /Down] arrow buttons to move the scroll and adjust the contrast.
1.4 AUDIO SETUP Menu
The audio setup options are illustrated below:
(1) DIGITAL OUT
Highlight the DIGITAL OUT option, and press the
Arrow buttons to choose the audio output mode
you prefer. There are 3 optional audio output
modes: SPDIF / RAW, and SPDIF/ PCM,OFF.
(2)
DOWNMIX
There are two modes, one is LO/RO, one is LT/RT.
1.5 CUSTOM SETUP MENU
The custom setup options are illustrated below:
(1) ANGLE MARK
There are On and off the two choices for this
item. If in the ON mode, when play a disc which
the content is multi-angle shot, you may press
the ANGLE button on the remote control to enjoy
the scene in different angles.
(2) PARENTAL CTRL
Parental Ctrl:1,2:G,3:G,4:PG13,5,6:R,7:NC17,8
the eight levels. The first level discs are open to
people of ever age and eight level only suitable for the adult.If you want to change the
parental ctrl setting, enter the user's age control item and then enter four digital
password. The default password is 6666(if you are using this player for the first time,
just input this code).If the input code has been confirmed ,the level setting up menu
will appear. Move the cursor to choose the expected level.
(3) PASSWORD
To change the password, you will be prompted for the old password, then be prompted
Screen Setup
for new one. Enter a 4-digit number ( this is your password).But the PASSWORD to the
factory defaults.
TV Type
4:3 PS
(4) DEFAULT
TV System
PAL
The DEFAULT setup options are RESTORE factory setup. Let your player work on
Video Output RGB
best state.
Brightness
Normal
Contrast
0
Select
Change
Audio Setup
Digital Out
SPDIF/RAW
Downmix
Lo/Ro
Select
Change
Custom Setup
Angle Mark
On
Parental Ctrl
8 Adult
Password
New
Default
Read
Select
Change
9
User Interface of DVD Playback
2. Mp3 PLAYBACK
When an MPEG and an Mp3 disc is loaded, the screen will be as follows:
Queen
1/17
Current
ROOT
directory
CLOUD
name
ROOT
ROOT
Show files
44.1KHz 128Kbps
04:49
contents
Press [UP/DOWN] to select the file when the cursor appears in the file window.
Press select to play the current file selected by the cursor.
Press [LEFT/RIGHT] to switch between the directory window and the file window.
Note: During Mp3 playback, Forward Scan and Reverse Scan are not available.
Note: The player will not identify or play an MP3 disc under the following conditions:
the recording format is not supported(make sure the files are in MP3 format),the
disc is badly scratched, damaged or dirty, the disc is not finalized.
00:17:00
The playing file
01. Was Bor
1
is a Mp3 audio
02. Let me li
2
file.
03. You are my
3
04. Under pre
4
The playing file is
001-1
5
a JPEG picture file.