Dish TV A2 Hızlı Başlangıç Kılavuzu - Sayfa 16

Ölçüm Cihazları Dish TV A2 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Dish TV A2 20 sayfaları. Freeview recorder
Ayrıca Dish TV A2 için: Hızlı Başlangıç Kılavuzu (16 sayfalar)

Sayfayı Yazdır

The Dish TV A2 is powered ON, but there's no Video/Audio on TV.

Solution 1: Ensure the HDMI cable used is firmly connected to both the Dish TV A2 and

the TV. Try disconnect and reconnect the HDMI cable, if required.

Solution 2: Ensure you selected the correct Input/Source on the TV. Most TV Remotes

have an Input/Source button which provides a list of video inputs for the TV.

Use the Input/Source button until the correct HDMI Input is displayed on the

TV.

Solution 3: Try replacing the HDMI cable used to connect the Dish TV A2 to the TV.

Solution 4: Try connecting the Dish TV A2 to another TV.

Solution 5: If the Dish TV A2 is connected to an AV Receiver or other device, such as

an HDMI Switch, before being connected to the TV, try connect directly to

the HDMI Input on the TV. If this works, the AV Receiver, or HDMI Switch,

etc... may not be passing the HDMI video signal on to the TV, or might be

incompatible with the video output format from the Dish TV A2.

Solution 6: If possible, try another device (DVD Player) that can output an HDMI video

signal using the same connections.

Solution 7: Ensure the video output format from the Dish TV A2 on HDMI, is compatible

with the TV.

1. Press the Google Home

2. Select the Settings icon in the top-right.

3. Follow the steps according to the Android TV Settings menu.

• Select Display → HDMI Auto Adaptation → OFF.

• Select Display → Custom Display Format → Change to match the TV.

NOTE: By default, the Dish TV A2 will attempt to Auto Adapt the output Resolution to

match the TV (Eg. 1080p/50Hz). But some TVs may only accept a 60Hz video signal,

or while they accept 2160p the video signal is limited to 30Hz. So changing the video

output format of the Dish TV A2 may resolve HDMI issues. Contact the Manufacturer,

or check the Manual for information about what video output format is compatible with

the TV.

The Dish TV A2 has several LED indicators, what do they mean?

Blue Ring + Flashing LED: The Recorder is booting up, and getting ready.

Blue Ring + Green LED: The Recorder is powered on, and ready to use.

Blue Ring + Red LED: The Recorder is powered on, and "recording".

No Ring + Red LED: The Recorder is in "standby", press the POWER

on the Remote, for the Recorder to power on.

Blue Ring + No LED: The Recorder has power, but isn't booting up, contact Dish TV.

Troubleshooting Tips

button to access the Android TV Home screen.

button