AromaTech AT600 Kullanıcı Kılavuzu - Sayfa 8
Aksesuarlar AromaTech AT600 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AromaTech AT600 15 sayfaları. Bluetooth nebulizing fragrance diffuser
Sayfayı Yazdır
Cleaning the Diffuser
—
To ensure your diffuser runs seamlessly, make sure to clean
it every time you refill the bottle or use a new essential/
aroma oil.
—
If you can no longer smell the scent:
—
Check to make sure bottle is not empty.
—
If the bottle is full but still not diffusing the fragrance,
then the diffuser may be clogged and needs to be cleaned out
with rubbing alcohol.
How to Clean your Diffuser
1.
Turn the device off.
2.
Unscrew the bottle and replace the essential oil with rubbing
alcohol.
3.
Screw the bottle into the AT600 and let it run for 10-15
minutes.
4.
When 10-15 min is up replace rubbing alcohol with your
essential oil.
14
CAUTIONS
—
Only use the power adapter supplied with the device.
—
Never operate the diffuser if the power adapter is damaged.
—
Do not use the diffuser if any part of the device
is broken.
—
To reduce the risk of electric shock, do not attempt to
service the device in any way other than as described in
the "Care & Maintenance" section of this manual.
—
Do not disassemble or attempt to repair the diffuser; in
the event of a problem, please contact us at 1.888.276.6245
or email [email protected]
—
When moving the device, always keep it upright and secure
with both hands.
15