Arometrix Extraction Finder Kullanıcı Kılavuzu - Sayfa 9
Ölçüm Cihazları Arometrix Extraction Finder için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Arometrix Extraction Finder 20 sayfaları.
Ayrıca Arometrix Extraction Finder için: Kullanıcı Kılavuzu (14 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
2. Next, connect the hoses.
3. Then, ensure all connections are properly installed.
4. Finally, ensure the system and installation conform to all applicable laws and ordinances.
Installation of the Extraction Finder Monitor involves the following steps:
1. Install the Extraction Finder monitor outside of the C1D1-designated area. Use the supplied 10'
power cord to power your monitor.
2. Connect the sensor cable to the monitor. The monitor will take a few seconds to turn. You will see
splash screens, followed by the interface screen. It will boot up in 5 minutes or less.
3. In the Settings section on the monitor's UI, ensure the following:
a. Set Auto Integration by checking the AID (Auto) checkbox
Arometrix, Inc.
arometrix.com/resources
9