Acoustic Loop1 Kullanıcı El Kitabı
Müzik Pedalı Acoustic Loop1 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Acoustic Loop1 2 sayfaları.
Sayfayı Yazdır
OWNER'S MANUAL
Thank you for purchasing the Acoustic® Loop1
Audio Looper Pedal.
Your Loop1 pedal allows you to record the sound of
your instrument to create an audio loop that can then
be played over or layered with further recordings of
your playing. The Loop1 is a great way to jam along
with yourself at home for hours of fun or can be
used on stage to create sonic soundscapes and live
backing tracks. Also the Loop1 can be a powerful
writing tool to record ideas, audition and layer parts
in real time. We hope that as you use your Loop1
you are inspired to play more and loop all kinds of
instruments - It will work well with an Electric Guitar
but also Acoustic Electric Guitars, Basses or any
signal you can send over a ¼" instrument cable.
Features:
• 30 Minutes of Total Recording Time
• True Bypass Switching
• 4 LED Lights Count Up to Indicate Recorded
Loop Position
• Single footswitch operation: Record/Playback/
Overdub/Undo/Redo
• Memory Storage of Last Recorded Loop (saved
when disconnected from power)
• Powered by a 9 Volt DC adapter supplying 140
mA, (-) Tip (Power Supply Not Included)
• Sturdy Metal Case Design
• 3 Year Warranty
Specifications:
Max Recording Time: 30 Mins
Max Layers of Overdubs: Unlimited
Input: 1/4" Instrument Level Input
(Impedance of 470k Ohms)
Output: ¼" Instrument Level Output
(Impedance of 100 Ohms)
Power Draw: 9V Negative (-) Tip Supplying a
minimum of 140mA
Dimensions: 3.68in (D) x 1.65in (W) x 2.05in (H)
Weight: .33 Lbs (5.28oz)
QUICK START GUIDE
To record a loop:
• Press footswitch to start recording
• Rock out.
• Press footswitch to end recording.
To playback a loop:
• Press the footswitch once
To overdub another loop on top of a loop:
• Press footswitch to start recording
• Rock out some more.
• Press footswitch to end recording.
To stop playback:
• Press footswitch 2x
To Undo last loop or overdub:
• Press footswitch and hold for 2 seconds
To delete a loop:
• Press footswitch 2x and hold