3D Systems Figure 4 Standalone Hızlı Başlangıç Kılavuzu - Sayfa 2
3D Yazıcılar 3D Systems Figure 4 Standalone için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. 3D Systems Figure 4 Standalone 2 sayfaları.
Ayrıca 3D Systems Figure 4 Standalone için: Kurulum (4 sayfalar)
Sayfayı Yazdır
®
Figure 4
Standalone Quick Start Guide
Please see the Figure 4 Standalone User Guide, found on support.3dsystems.com/figure4standalone, for safety information and comprehensive operating instructions.
Save all foam and packing material for future use. Shipping without the original packing material may cause damage to the printer.
8. Install 3D Sprint
9. Add Printer
1
2
Ensure your computer can
run 3D Sprint - See
User
Guide
for specs.
1.
On a PC, go to
support.3dsystems.
com/figure4standalone.
Click In-
1.
Open 3D Sprint. Click the Printer icon if Printer window is not already open.
stall Software link.
2.
Click Find Printer button to find printer on your network. If this fails, enter
the printer's IP address and press Enter. The IP address can be found on the
Click 3D Sprint Download Page.
2.
printer's touch screen on the Settings tab (above, right).
Follow instructions to install
3.
Click the Figure 4 Standalone icon that the software just found.
Sprint.
4.
Click Next.
Printer's IP address will need to be an exception on your network's
firewall, if applicable. Both the printer and the 3D Sprint PC must be
on the same network and connected to the internet.
12. Sign Up for Infocenter
1
2
1. Below the login section, click Not a member? Register here.
2. Fill out all fields. The printer serial number is on the back label. Click Sign Up.
3. You will receive an email confirmation with a link to set your password. Follow the
link, enter your preferred password, and then click Change Password. This will
log you into the Support website.
1
2
3
4
13. Activate Warranty
3
1
2
1. On
support.3dsystems.com/
figure4standalone, click Warranty
Registration.
2. Enter your printer's serial number
and click CONFIRM. The SN is on
the back label of your printer.
©2020 3D Systems, Inc. All rights reserved. P/N 46-0032 Rev. C
10. Set Up 3D Sprint for Figure 4 Standalone
1
2
3
4
1.
Click the icon of the Material that you
3.
Click the icon of the Print Mode
plan to use. Click Next.
you wish to use. Click Next.
2.
Click the icon of the Shade you plan
4.
Click the Build Style you wish to
to use. There may only be one. Click
use. Click Set.
Next.
14. Check for Printer Updates
Other Useful Documents
Please visit
Full Product Documentation - Click this link
to see the User Guide, Customer Information
Bulletins, copies of guides in the printer box, and
software downloads.
Best Practices - Click this link to view quick ref-
erences, 3D Sprint tutorials, and post-processing
charts.
Materials - Click this link, and click under Figure
4, to view the Standalone materials' Safety Data
1. In 3D Sprint, go to Printer Tools >
Sheets (SDS).
Check for Updates. If updates are
available, download/install them.
3D Sprint Online Help - While in 3D Sprint,
launch online help by pressing F1, or by clicking
2. In the future, 3D Sprint will check
the Help icon.
for updates each time you open
the software.
11. Register Your Printer
It is vital that you register your
printer to activate your Service
warranty.
1. To register your Figure 4 Stand-
alone Printer, go to
tems.com/figure4standalone.
2. Click LOGIN in the upper-right
corner.
3. If you already have an account,
log in and skip to Section 13. If you
must create an account, proceed
to Section 12.
support.3dsystems.com/figure4standalone
and visit these helpful links:
support.3dsys-