Arrakis Systems ARC-HP Manuel - Sayfa 3
DJ Ekipmanları Arrakis Systems ARC-HP için çevrimiçi göz atın veya pdf Manuel indirin. Arrakis Systems ARC-HP 4 sayfaları.
STEP 4 (OPTIONAL) – If you have additional ARC-HP units, and would like to connect them to the Main
Studio, simply connect the Parallel output from the main ARC-HP unit to another secondary ARC-HP
unit's Main input.
Secondary ARC-HP
PARALLEL PORT
1 - PGM L+
2 - PGM L-
3 - PGM R+
4 - GND
5 - NA
6 - PGM R-
7 - TB Audio In 1
8 - TB Audio In 2
STEP 5 – Connect your headphones to either the 1/4" or 3.5mm headphone jacks on the front of the
ARC-HP.
IMPORTANT NOTE: The ARC-HP is designed to be used with contemporary high-efficiency
headphones (24 – 600ohm), not 8ohm headphones.
STEP 6 – Connect the power supply (supplied with the ARC-HP unit). Be sure to only use the supplied
AC power supply provided by Arrakis. Use of any other supply will likely destroy the unit, and void your
warranty. The power supply works with 110V outlets only.
COUGH FUNCTIONALITY
STEP 7 (OPTIONAL) – Add 'Cough' functionality to the ARC-HP. Connect your mic audio to the Control
I/O on the ARC-HP. This port is balanced, and uses pins 7 & 8.
STEP 8 (OPTIONAL) – Connect output pins 3 & 6 of the Control I/O to your Main Studio console mic
input.
This allows the user to press the Cough button on the front of the ARC-HP, which will mute the mic
audio. The switch is momentary, so press to cough, and then let go to restore mic audio.
This switch is Normally Closed, but when the Cough button is pressed, it will make the switch Open.
Main ARC-HP
Main Studio