3D Systems ProJet 5000 Manuel - Sayfa 3
3D Yazıcılar 3D Systems ProJet 5000 için çevrimiçi göz atın veya pdf Manuel indirin. 3D Systems ProJet 5000 14 sayfaları.
Sayfayı YazdırWhat's Inside:
A description of hardware, software, part material, networking components, and documentation that comprise the ProJet™ Production
Printing System.
An overview of the site requirements in typical engineering and design work spaces. These involve basic access, electrical, and
environmental conditions for configuring a safe and efficient work area.
A checklist is included to ensure that the facility is adequately prepared for installation of your printer.
Information on how to obtain assistance from
03.0 Symbols Used in this Guide
!NOTE.jpg|width=30,height=30! NOTE: The ProJet™ Production Printing System is part of 3D Systems' Multi-Jet-Modeling (MJM) product
line.
This symbol designates the accompanying texts or figures as either a
Caution: Indicates something may happen that could cause loss of data, damage to equipment, or personal injury.
WARNING:Indicates a hazard to both equipment and personnel that may be in the immediate area.
This symbol is used to warn of the presence of potentially
vicinity of this sign or behind the access panel. High voltage can cause severe burns or death. Access panels are for service only
and should be opened only by certified service personnel or trained maintenance personnel.
Invisible UV radiation
are for service only and should be opened only by certified service personnel. Use UV radiation eye and skin protection when
servicing with "bypass engaged."
A hot surface
burns. Access panels are for service only and should be opened only by certified service personnel or trained maintenance
personnel.
Harmful Irritant Warning
When accompanied by the word
save time or prevent subsequent inconvenience to the user.
04.0 The ProJet™ Production Printing System
The ProJet™ Production Printing System consist of the following components, providing these functions:
Automatically outputs 3-dimensional prints from digital data supplied to the printer in the required .stl file format, using a two-material
process.
ProJet™ client software is provided with each printer. This software provides users with the ability to set up and submit jobs to the printer,
and may be installed on additional user's workstations (within your facility) at no additional cost per user. Each workstation should meet
the minimum
"Client Workstation Requirements."
VisiJet® support and build materials - VisiJet® build material is for production of the actual prints, and the VisiJet® support material
produces the required support structures necessary to build 3-dimensional prints. These materials are formulated exclusively for use with
the ProJet™ Production Printing System.
04.1 What is Included with a ProJet™ Production Printing System
A ProJet™ 5000 System ships with the following:
One crated ProJet™ Production Printing System containing an accessory kit which consist of:
Two Build Platform
"Starter Pack" consisting of one (1) S300 Support Material Bottle and one (1) MX Build Material Bottle
3D Systems Customer Support Team.
is accessible in the vicinity of this sign or behind the panel. Radiation can cause eye injury. Access panels
is accessible in the vicinity of this sign or behind the access panel. Avoid contact. Hot surfaces can cause severe
: Indicates that skin or eye irritation could result while exposed to a chemical composition.
"NOTE",
the text and symbol are meant to call attention to a practice whose implementation can
CAUTION
or a
WARNING
HAZARDOUS VOLTAGE.
High voltage electricity is accessible in the
.