3D Systems ProJet MJP 5600 Orijinal Talimat Kılavuzu - Sayfa 8

3D Yazıcılar 3D Systems ProJet MJP 5600 için çevrimiçi göz atın veya pdf Orijinal Talimat Kılavuzu indirin. 3D Systems ProJet MJP 5600 18 sayfaları.

Sayfayı Yazdır

CPU

Intel or AMD processor with a minimum of 2.0GHz

RAM

4 GB

30GB of available hard-disk space for

cache.

Temporary ﬁle cache requires about 3GB

Hard Disk

free disk space for every 100 million

points.

- OpenGL 2.1 and GLSL 1.20 enabled graphics card

- Screen resolution 1280x960

Graphics card:

Display/GPU

Intel HD or Iris (HD 4000 or newer), or

Nvidia GeForce GTX 285, Quadro 1000 or newer, or

AMD Radeon HD 6450 or newer

3 button mouse with scroll

Keyboard

Other

Internet Explorer 9 or newer

Microsoft .NET Framework 4.5 (installed with application)

Network Interface

An Ethernet network connection to transfer print jobs from workstation(s) to the printer is required.

Network Speciﬁcations, Physical: The machine's internal controller provides an integrated, 100-

megabit-per-second (Mbps) or Gigabit Ethernet network connection. This connection supports both the

100base-T and 1000base-T Ethernet standards. The controller's connector (an RJ45 socket located on

the back panel) is designed for attaching a shielded twisted pair (UTP) Ethernet cable.

When a facility's internal network is not 100base-T or 1000base-T, a media converter, such as a Coax

to 100base-T will be required. Consult with your organization's network engineering or MIS staﬀ to

provide assistance with these requirements.

The printer works on networks running TCP/IP ONLY. Each printer MUST have a STATIC IP address on

the network. Additionally, each printer's subnet mask and default gateway must be known and

available to the 3D Systems Field Service Engineer or authorized reseller at the time of installation, and

should also be known by personnel installing the client software. They will need access either to the

appropriate subnet mask or the individual IP address of each printer to complete the workstation

software installation, and to enable access to any printer on the network.

Not all networks have TCP/IP installed. Make sure to have a network administrator check that TCP/IP

are both installed and are running as required PRIOR TO THE ARRIVAL of the printer.

Material Storage

Part and support materials should be stored in a conveniently located storage cabinet in close

proximity to the printer. A cabinet is recommended to protect against long term exposure to external

UV light sources, including sunlight, overhead lighting, or other UV light sources. Storage temperature

of the material should not exceed the speciﬁed maximum of 35°C (95°F). Part material should be

stored away from strong oxidizing agents, such as hydrogen peroxide, bromine, or chromic acid.

When storing material bottles that have been used but still have material in the bottles, do not lay the

bottles on their side in storage. Store the material bottle in the original box with the side spacers

installed. DO NOT rest on the nose of the bottle. Also, in the case where bottles with materials are

removed from the MDM and are still warm, the material bottle must be stored with the cap vented. If

the warm bottle is not vented, the wax will contract during cooling and cause the bottom of the

material bottle to ﬂatten. If this happens, the bottle cannot be reinstalled into the MDM.

More detailed information on the VisiJet® build material and VisiJet® support material, relevant

applicable safety precautions and remediation, and speciﬁc storage and disposal requirements, can be

found in the

Safety Data Sheet

maintain a copy of the two

To obtain the VisiJet material SDS from 3D Systems, click

(SDS). Your organizations' Facilities Manager (or equivalent) should

SDS

documents, and provide ready, convenient access to these documents.

Multiple core processor. Hyper-

threading and clock speeds above

3GHz can be beneﬁcial but should be

paired with a good balance of cores.

8 GB

SSD or 10,000 RPM HDD

- OpenGL 3.2 and GLSL 1.50 enabled graphics card.

- NVidia or AMD GPU with 1GB of RAM or more

- Screen resolution 1280x1024 or higher

Google Chrome or Internet Explorer 11

here

for additional copies. If further