Displays2go INTWHITWRLS Kullanıcı Kılavuzu - Sayfa 11

Beyaz Tahta Displays2go INTWHITWRLS için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Displays2go INTWHITWRLS 15 sayfaları. Wireless
Ayrıca Displays2go INTWHITWRLS için: Sorun Giderme Kılavuzu (4 sayfalar)

Sayfayı Yazdır

DISPLAYS2GO

Calibration

Calibrate after connected with the projector.

4.1

Install the Calibration Software.

Install the calibration software from the supplied USB flash drive onto your PC. Then

Find and open the "Optical Touch Device Control Panel" on your Windows desktop.

4.2

16- or 9-point calibration.

NOTE: For accurate calibration, please connect the whiteboard with the PC using the

USB cable (3.3). After the calibration is done, it can be switched to wireless mode.

Click Setting at bottom of the calibration software.

Interactive Whiteboard