Aerialix ARLX-OM2400 Bina El Kitabı - Sayfa 2

Anten Aerialix ARLX-OM2400 için çevrimiçi göz atın veya pdf Bina El Kitabı indirin. Aerialix ARLX-OM2400 12 sayfaları. Collinear antenna kit

802.11 2.4Ghz Low-Power 5dBi Vertical Collinear Antenna

Thank you for purchasing the Aerialix omnidirectional antenna kit. The enclosed kit requires basic mechanical and electrical

skills. Aerialix disclaims responsibility for any damage or injury caused in the construction of this antenna. This kit is easy to

assemble as long as you follow the directions, take your time, and measure twice. Construction time is one hour, if done

carefully. However it could take much longer if done in haste. You should check our website for the latest version of this

manual at:

http://www.aerialix.com/support.html

The radome (enclosure) of this antenna is constructed of fiberglass. Small particles of this material

are known to be a skin irritant and are probably harmful in other ways as well. While we have made

an effort to keep exposure to any of this fiberglass dust to a minimum and the radome has been

treated with a black acrylic urethane paint further reducing fiberglass dust, rubber gloves should be

worn, and caution used, when touching any unfinished portion of the radome. Children should be

supervised by adults when constructing this kit.

There are two main sections to this antenna. Starting from the bottom of the antenna, the first is the RF connector/decoupler

section with feedline and the second is the elemental array section comprised of a meander-line phase reversal coil, and the

element tubing. The antenna is basically an array of dipoles that are phased aligned by meander line phase-reversal coils that

mate each 1/2 wavelength element to one another.

Figure 1. Conceptual physical diagram. Your kit may contain more or less elements than depicted in the diagram.

Equipment and Materials Needed

Inventory:

When unpacking your kit, do so on a clean and uncluttered workbench.

CONSTRUCTION WARNING: