Acoustic Energy Aelite On-Wall Kullanıcı El Kitabı - Sayfa 2

Konuşmacılar Acoustic Energy Aelite On-Wall için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Acoustic Energy Aelite On-Wall 4 sayfaları. Acoustic energy ae1 classic: brochure
Ayrıca Acoustic Energy Aelite On-Wall için: Broşür (2 sayfalar)

Sayfayı Yazdır

Congratulations on choosing the Acoustic Energy AELITE

On Wall Loudspeakers.These powerful two-way

loudspeakers feature metal diaphragm technology and

are capable of outstanding performance. Please take a

few moments to read this manual. The advice it contains

will enable you to get the very best performance out of

your Acoustic Energy loudspeakers.

The AELITE On Wall speakers utilise metal cone mid-bass drive unit

technology, proven in our Reference Series. The rigid anodised alloy

cones ensure pure piston action and also act as heat sinks for the

bonded voice coils. These features provide exceptional clarity,

transparency, dynamics and power handling.

The tweeters - or treble drivers - are high-quality neodymium units

with silk fabric domes integrating smoothly with the rest of the

system.

All drive units are fully magnetically shielded so that the speakers

can be used in close proximity to a TV screen or monitor for AV

applications.

The Acoustic Energy AELITE On Wall loudspeakers use quality OFC

internal wiring, which enhances detail and transparency.

Introduction

The AELITE On Wall speakers should be mounted on a solid wall or

partition using the fixing points that are provided on the rear. Rigid

support is essential for the speakers to develop their full detail and

dynamic performance.

A drilling template is provided to ensure accurate spacing for these

fixings; however a suitable fixing method should be chosen to suit

the wall construction. If in doubt then please contact a professional,

as these speakers are heavy.

Due to the comprehensive fixing points the AELITE On Walls can be

mounted vertically or horizontally, which makes them ideal for

placement around screens for AV use. Closeness to room boundaries

has a major impact on the low frequency performance. This effect is

relied upon to correctly balance the response of the speaker.

When using your speakers with a suitable AV amplifier/processor

and Subwoofer (such as the AELITE Sub), it is advisable to set the

speaker's size to 'small' as this will the correctly feed the low audio

information through the subwoofer giving you an improved power

response and better blended sound from your system. If the filter

point is variable it should be set to 80Hz

Positioning