Acoustic Energy AEGO5 Kullanıcı El Kitabı - Sayfa 5

Hoparlör Sistemi Acoustic Energy AEGO5 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Acoustic Energy AEGO5 8 sayfaları. Powered 5.1 surround sound speaker system

Sayfayı Yazdır

1. Connecting Aego5 (with External Power Amplifier)

AEGOp5 Decoder

AEGOP5

AEGOp5 Front Panel

1. The POWER Button

2. LCD Display

Turns AEGO

5 on or off.

Provides you with

information regarding the

system status and settings.

Front

Rear

Left

Centre

ACOUSTIC ENERGY LIMITED,

16 BRIDGE ROAD, CIRENCESTER,

GLOUCESTERSHIRE GL7 1NJ

WWW.ACOUSTIC-ENERGY.CO.UK

Front

Rear

Sub

MULTIPIN

Right

Developed And Manufactured By Videologic Systems.

AEGOp5 Rear Panel

1. MULTIPIN Audio Output:

This output feeds 6 channels audio signals to the matching input on a control centre or power amplifier via a multipin (DIN) cable.

2. Main Outputs (Front Left, Front Right, Rear Left, Rear Right, Centre and Sub):

The Six outputs feed audio signals to the matching inputs on a control centre or power amplifier.

3. AUX1 AUX2 and LINE Inputs:

These inputs accept signals from stereo analog signal sources.

4. OPTICAL and DIGITAL inputs:

Your AEGO

5 has two types of digital inputs. One S/PDIF (OPTICAL) and one coaxial (DIGITAL) input. Connect the digital outputs of the

sound sources to these inputs.

5. 12V DC Power Input:

Connect the AEGO

5 power adapter to an AC outlet. Please refer to page 6 to determine the correct voltage in your area.

Front

Rear

Left

Centre

Sub

Front

Rear

Right

3. Speaker Channel LEDs

Each LED represents the status of an individual channel. When

a particular channel is active, the LED lights up.

The colour of the LED also indicates the frequency range of

that channel:

* Red means this particular channel has been set to output a wider frequency

range that contains bass signal between 20Hz to 120Hz.

* Green means this particular channel doesn't contain the bass signal between

20Hz to 120Hz.

Left

Right

AUX 2

AUX 1

LINE IN

OPTICAL

DIGITAL

POWER

12V DC

AEGOp5 Remote Control

input

power

mute

test

balance

delay

prologic

field

EQ on/off

EQ setup

preset 1

preset 2

preset 3

save1

preset 4

load

BassManager

Cen

SL/SR

VOL

D Time

DRC

reset

1 POWER Button

On/off key

2 INPUT MODE Button

Select from the 5 different source inputs

3 TEST Button

Test signal for the 6 discrete channels

4 MUTE Button

Mute the sound (toggle on and off)

5 PRO LOGIC Button

Select from 4 different surround settings

6 DELAY Button

Select the desired channel to engage the time

delay adjustment

7 BALANCE Button

Set the volume setting for each of the 6 channels

8 EQ SETUP Button

Select up to 5 EQ Band Settings

9 EQ ON/OFF Button

Activate the selected EQ Band Setting

10 FIELD Button

Select from 6 different sound fields

11 PRESET Button (P1, P2, P3, P4)

Recall up to 4 different presets

12 SAVE Button

Store your settings into a selected preset

13 LOAD Button

Activate your saved setting stored in selected preset

14 SPEAKER ON/OFF Buttons (CEN, SL/SR, SW)

CEN Button activates/deactivates the centre

channel speaker.

LS/RS Button simultaneously activates/deactivates

the left and right rear speakers.

SW Button activates/deactivates the subwoofer.

15 BASS MANAGER Button

Switches between three bass configurations

(bass config.1, bass config.2 and bass config.3)

16 VOL + and VOL -

Increase/decrease the volume.

17 D TIME Button

Increase/decrease the delay time.

18 DRC Button

Select among 3 different dynamic range

compression ratios.

19 RESET Button

Resets the system to its factory default settings.