CAMDEN CM-47-ADP1 Manuel

Kapı açma sistemi CAMDEN CM-47-ADP1 için çevrimiçi göz atın veya pdf Manuel indirin. CAMDEN CM-47-ADP1 2 sayfaları.

D o o r Ac t iv a ti o n D e v i c e s

CM-47-ADP1 Manual

INSTALLATION INSTRUCTIONS

THIS PACKAGE INCLUDES:

(1) Extension Ring

(1) Parts Kit

1. GENERAL DESCRIPTION

Camden Door Controls CM-47-ADP1 extension ring can be

mounted with the CM-47S ABS Round enclosure and with the

Camden CM-40 series 'all active' heavy-duty, ADA compliant door

activation switches. These switches are UL/CSA approved and

optional Weatherproof, watertight coating are available.

2. SPECIFICATIONS

CM-69-ADP1:

Dimensions

5'' DIA x 1-1/4''D

(167mm x 31mm)

4. CM-47SER SERIES FRONT AND SIDE VIEW

5''

[128mm]

3. INSTALLATION

ACTIVE SWITCH INSTALLATION:

Firmly mount the Black polymer (ABS) box (Sold Separately)

against a surface or a wall. Place the extension ring over the

round enclosure. Align the crescents with the middle standoff

of the round box to help keep the ring in place. Screw the two

6-32 x 1-1/2'' screws through the ring and into the round box.

Don't screw all the way, leave about 1/4" of room for the switch

to be mounted. To place the switch onto the ring, start with the

bottom, slide the groove at the bottom of the backplate over the

screw then put the top screw through the cut-out at the top of the

backplate and slide the switch down. Take a screwdriver or the

supplied hex key and tighten the socket head screws, securing the

switch in place.

1 1 4 ''

[31mm]

Page 1 of 2