3D Upfitters LulzBot Mini 2 R1 Kurulum Kılavuzu - Sayfa 9

3D Yazıcılar 3D Upfitters LulzBot Mini 2 R1 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. 3D Upfitters LulzBot Mini 2 R1 18 sayfaları. Enclosure kit

Sayfayı Yazdır

4. Assemble Door

Attach the hinges to the door and door frame using M4 ﬂat head 12mm screws and

nuts. There will be some play in the hole size so that you can adjust the door to swing

freely.

Attach the door knob by ﬁrst inserting the square M4 nut into the slot. Use a 16mm

cap head screw to attach the door.

Attach the strike plate by ﬁrst attaching the adhesive

rubber backing to the acrylic. The black square strike

plate should then ﬁt snuggly over the backing. If there

is slippage, bent the strike plate in slightly.

The front should now look like the picture below.