CAME AX5024 Kurulum Kılavuzu - Sayfa 11
Garaj Kapısı Açıcı CAME AX5024 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. CAME AX5024 16 sayfaları. Operator for swing gates
Ayrıca CAME AX5024 için: Kurulum Kılavuzu (16 sayfalar)
Sayfayı Yazdır
INWARD OPENING CONNECTIONS AND INSTALLING
(non-issued)
Supplementary bracket
TABLE 1
A
Opening
(mm)
90°
130
Fastening the braces
Weld pillar bracket to the non-issued supplementary bracket, while gate is open, then secure the brackets to the pillar, making sure the "A" and
"B" quotas shown in table 1 are met. Weld, or secure with proper screws, the gate bracket, making sure the "E" quota is met, as shown in table
1. Finally, secure the gearmotor to the brackets with the issued screws and washers.
1
2
For AX5024 gearmotors, directly secure the standard issue bracket to the pillar without using the supplementary bracket, while taking into
account the measurements shown in table 2.
Finally, secure the gearmotor to the brackets with the issued screws and washers.
A
B
E
(mm)
(mm)
130
800
Extra bracket
Gate bracket
Pillar bracket
TABLE 2
Opening
90°
Gate bracket
Pillar bracket
A
A
B
(mm)
(mm)
200
220
E
(mm)
1100