3DGence DOUBLE P255 Bakım Kılavuzu - Sayfa 18

3D Yazıcılar 3DGence DOUBLE P255 için çevrimiçi göz atın veya pdf Bakım Kılavuzu indirin. 3DGence DOUBLE P255 19 sayfaları.

10. Raise the heatbed (Menu-> Upper heatbed).

11. Lower the heatbed (Menu ->Lower heatbed).

12. Collect excess grease from linear carriages and trapezoid bolt nuts using a paper towel.

LUBRICATING THE X AXIS

1. Move the module to the left until it stops to get access to the grease nipple on the X axis carriage.

2. Push grease into the grease nipple of the linear carriage of the X axis (Fig.75) by pressing the lubricator

nozzle firmly against the grease nipple and pressing smoothly the lubricator lever once.

Fig.75 Linear carriage of the X axis

3. Move the module to the right and left twice.

4. Remove excess grease from the linear carriages using a paper towel.

3DGence DOUBLE P255 - maintenance activities | version 07.2021